|
Post by Asphalt on Aug 2, 2010 21:04:59 GMT -5
If you dont like to show WIP stuff thats fine, but feel free to let us know what you are doing and how it is coming.
|
|
|
Post by spudafett on Aug 6, 2010 15:38:41 GMT -5
here is my mando inspired blank torso: and then another torso set that I made myself using a jodo-kast and a modified cobra comander bottom half... I am hoping that sean won't mind casting up some copies of this one as well:
|
|
|
Post by Asphalt on Aug 6, 2010 16:26:56 GMT -5
Its radioactive Bobba Fet. It came out nicely. So is the armor sculpted or from a dremmelled out casts? I can give the second one a try, but I am not sure about the shoulder tassles.
|
|
|
Post by spudafett on Aug 6, 2010 18:34:13 GMT -5
I figure'd you'd have to remove the shoulder tassles on the second one. I'll go on and cut those off myself before sending it.
as for the first one the back piece of armor was dremeled off an original figure, and then cast as a seperate piece. The front piece is a cast duplicate of a modified Jango Fett removable chest armor from an older version of Jango. so to answer your question they are both casts from altered originals.
|
|
|
Post by Asphalt on Aug 6, 2010 18:38:36 GMT -5
Leave it on, I will attempt it with it. The worst that can happen is it catches a bubble and the tassel is shorter.
|
|
|
Post by Viper on Aug 8, 2010 23:12:23 GMT -5
Made a ton of progress on mine today, I'll post pics tomorrow. I'm really enjoying this & wouldn't mind doing more. Sean, if you like what I end up making I can do more torsos for you if you'd like.
|
|
|
Post by Viper on Aug 9, 2010 23:44:50 GMT -5
|
|
|
Post by Asphalt on Aug 10, 2010 12:26:12 GMT -5
Looking good, is he going to be bare chested under the gear or will yoube sculpting clothing?
|
|
|
Post by Viper on Aug 10, 2010 23:59:51 GMT -5
He's going to be wearing a t-shirt, so a few wrinkles will be added. Actually wouldn't mind taking a crack at a Nate Drake torso at some point.
|
|
|
Post by SGCaper on Aug 13, 2010 16:18:50 GMT -5
All those are looking great. I ran into an issue with my torso, the ball joint had a bubble and the ball snapped off. I'm doing a repair and gonna work more on it this weekend.
|
|
|
Post by Asphalt on Aug 13, 2010 18:04:41 GMT -5
If it doesnt fix let me know which torso it is and I will see if I can get you a replacement piece.
|
|
|
Post by Viper on Aug 15, 2010 23:14:42 GMT -5
Finished mine tonight, quite happy with how it turned out. I'll post pics tomorrow after the fixit sets.
|
|
|
Post by Viper on Aug 16, 2010 23:09:25 GMT -5
Finished Torso: Didn't do wrinkles across the back half as fabric's generally pulled tighter there & doesn't gather. Really pleased with how this turned out & look forward to doing something like this again.
|
|
|
Post by Dark Horse on Aug 17, 2010 1:06:42 GMT -5
I'm about 3/4 finished with mine. Though I'm gonna have to do a special forearm to accompany it I think.
Clue - RE4.
|
|
|
Post by Viper on Aug 17, 2010 5:01:21 GMT -5
Ooh... Krauser.
|
|
|
Post by Asphalt on Aug 17, 2010 7:00:08 GMT -5
Finished Torso: Didn't do wrinkles across the back half as fabric's generally pulled tighter there & doesn't gather. Really pleased with how this turned out & look forward to doing something like this again. I'm gettin a red X viper.
|
|
|
Post by daremo on Aug 17, 2010 9:38:58 GMT -5
I'm 1/4 done, so far so good.
|
|
|
Post by Xhairs on Aug 17, 2010 21:11:52 GMT -5
great stuff guys.
|
|
|
Post by spudafett on Aug 17, 2010 21:26:08 GMT -5
Finished Torso: Didn't do wrinkles across the back half as fabric's generally pulled tighter there & doesn't gather. Really pleased with how this turned out & look forward to doing something like this again. I'm gettin a red X viper. ditto
|
|
|
Post by Viper on Aug 17, 2010 22:58:46 GMT -5
Pricks lost it. Let's see if they can keep this around for more than 10 minutes.
|
|
|
Post by Asphalt on Aug 23, 2010 16:20:54 GMT -5
Spud, I got yours boxed today to be molded tomorrow. Viper I got yours in the mail today to be boxed tomorrow.
|
|
|
Post by Asphalt on Aug 23, 2010 17:33:43 GMT -5
Like I told you in PM, when I got the Fett you bashed together you shaft was too short to stay in the socket. So I had to rebuild it. I found a CC to use for the abs and put the ball in the bottom instead of the top like in the Tabula Rasa. When you cut the abs in half there isnt enough room for a full socket. thats why I flipped it.
|
|
|
Post by spudafett on Aug 25, 2010 12:01:28 GMT -5
looks great sean! can't wait to see it cast up and duplicated!
|
|
|
Post by daremo on Sept 1, 2010 22:21:06 GMT -5
Here's where I'm currently at with my torso. I'd say it's more than 50% complete. Once I get everything sculpted, I'll go back and clean it up. I plan to mod the head and include a removable mask.
|
|
|
Post by Dark Horse on Sept 1, 2010 22:33:56 GMT -5
|
|
|
Post by Viper on Sept 1, 2010 22:38:55 GMT -5
Cable?
|
|
|
Post by starwarsgeek on Sept 1, 2010 23:59:03 GMT -5
Hmmm... I guess I should get started on mine.
|
|
|
Post by daremo on Sept 2, 2010 22:04:46 GMT -5
Testing out some parts. Almost there...
|
|
|
Post by Asphalt on Sept 3, 2010 4:26:32 GMT -5
Daremo, I am completely suprised you made a ninja. I never saw that coming.
|
|
|
Post by daremo on Sept 3, 2010 6:23:13 GMT -5
Daremo, I am completely suprised you made a ninja. I never saw that coming. Daremo is to ninja as Spudafett is to Mando, ha ha! The Storm Shadow torso is the only ninja torso Hasbro has done in this style. I wanted something new that was a little closer to the real thing.
|
|